Waste Recycling Production Line

Wet pan mill

The wet grinding pan mill is mainly used for separating gold, silver, lead, zinc, iron, molybdenum, copper, antimony and so on. It performs an excellent job in secondary crushing, finely crushing and super finely crushing. It grinds ores by wheel driving force. Firstly, the power is transferred from the motor to the reducer, then to the horizontal shaft, and finally to the grinding wheel; the wheels then rotate anticlockwise.The wheels can revolve around the vertical shaft of the pan mill, and at the same time, it can revolve on its own axis, while the grinding base will remain still. The ores are pressed, rubbed and grinded repeatedly. 

Tel:+86-18239972076

E-mail:richard@zzgofine.com

PRODUCTS
Hot Products
  • 1
  • 2
  • 3

It works as following steps:

1. The grinding wheels mix up the ores and produce ore pulp while pressing and rubbing the ores.

2. The ores and water are evenly mixed, which makes the pulp density and other indexes stable.

3. After the grinding process, the monomers are taken to the upper surface of the pulp and discharged through the overflow outlet of the water basin. Meanwhile, the coarse ores sink to the bottom of grinding base, being grind ed continuously till they reach the required fineness.

4. The screening mesh set up at the overflow outlet of the water basin classifies the ore fineness strictly to avoid the over-grinding and uneven fineness, which helps create better condition for next working process.

customer visit and working site

Zhengzhou Gofine Machine Equipment CO., LTD

Zhengzhou Gofine Machine Equipment CO., LTD

Zhengzhou Gofine Machine Equipment CO., LTD

If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.

TOP