Hot Products
  • 1
  • 2
  • 3

Advantages of disc granulator

Author: gufeng Time: 2019-11-14 16:28:42
The disc granulator is a type of granulator. The disc granulator is lined with high-strength fiberglass, which has the advantages of even granulation, high granulation rate, stable operation, strong and durable equipment, long service life and so on. It is an ideal granulator.
Zhengzhou Gofine Machine Equipment CO., LTD
The pelletizing disc adopts the overall arc structure, and the granulation rate can reach over 93. The pelletizing plate is equipped with three discharge outlets, which is convenient for intermittent production operation, greatly reducing labor intensity and improving labor efficiency. The reducer and motor are driven by flexible belt, which can start stably, slow down the impact force and improve the service life of the equipment. The bottom of pelletizing plate is reinforced by multiple radiation steel plates, which is firm and durable and will never deform. Thickened, weighted and solid base design, without anchor bolt fixation, stable operation.
Zhengzhou Gofine Machine Equipment CO., LTD
All kinds of dry powder materials are added from the top of the equipment, pre compressed by degassing and spiral and transported to the arc-shaped notch of two rollers. The two rollers rotate at the same speed and in the opposite direction, biting the materials into the groove and forced compression. The pressure on the materials after passing through the compression area gradually decreases, and the surface tension and gravity make them naturally come out, enter the crusher and the pelletizer for crushing, finishing, and then enter the vibration The qualified products are sent to the finished product warehouse or directly packed by the conveyor. The materials under the powder screen are sent back to the raw material warehouse for secondary rolling by the return device. The size of the extrusion pressure can be adjusted by the hydraulic system according to the need of particle strength. By changing the form of grooving on the roll surface, sheet, strip, olive, flat ball and other materials can be obtained.